Carbon fiber reinforced undirectioanl plate`s moulding process is a continuous resin impregnated carbon fiber cloth in the mold after the curing, and a continuous pultrusion. Carbon Fiber Plate produced by imported high-quality carbon fiber silk and molding resin composite materials of Toray Industries (TORAY). Our company carbon fiber plate has good performance of high tensile strength, corrosion resistance, anti-seismic, surge suppression, and so on. Carbon fiber unidirectional carbon fiber sheet give full play to the strength and elastic modulus, in the construction may be exempt from carbon fiber unidirectional fabric of the resin curing stage, the intensity of the use of high efficiency and easy construction. We produces the following four specifications of carbon fiber plate: 5cm × 1.2mm 10cm × 1.2mm 5cm × 1.4mm 10cm × 1.4mm
Technical merits: 1. High strength and high efficiency. Carbon fiber has excellent physical and mechanical properties, tensile strength is more than 10-15 times to ordinary steel, elastic modulus is better than steel, has excellent creep resistance, corrosion resistance and earthquake resistance. It is very suitable for repair and reinforced steel and concrete structure reinforcement. 2. Light weight, good flexibility Carbon fiber plate is stronger than steel, but the weight is only 1 / 5, of steel have a higher toughness, and can coil down, which can be supply with greater length withnot overlapping. 3. Construct convenient, construction quality is easy to assure It can be operated in wet conditions without large-scale construction equipment, without on-site fixed facilities. Carbon fiber length can be arbitrarily cut, the construction is simple and short construction time. This kind of material do not need pre-processing, process is convenient, allowing to overlap the plate. MKT-carbon fiber sheet is a unidirectional carbon fiber reinforced products, which produced by carbon fiber silk. It has two kinds of thickness of 0.111mm (200g) and 0.167mm (300g), and many kinds of widthness: 100mm, 150mm, 200mm, 300mm, 500mm and other special needed widthness requirements, that used for the tensile and seismic reinforcement of structural components. And it called carbon fiber composite material when used with MKT-carbon fiber impregnating adhesivel, which are suitable for reinforcement of concrete, wood structural, that can achieve requirements of "Reinforced Concrete Structure Design Code GB50367-2006", This produts can effectively improve the bearing capacity of components, anti-seismic performance and durability. It can applies to handle the increasing loads of the building, the change of engineering function, material aging, concrete strength grade is lower than the design value, structural cracks handling, harsh environment service component repair, protective reinforcement works, as well as sports, industrial products, components, and many other reinforcement areas. Technical Data carbon fiber model number | high strength I | high strength II | tensile strength(Mpa) | ≥2400 | ≥2000 | elastic modulus(Mpa) | ≥1.6×105 | ≥1.4×105 | elongation(%) | ≥1.7 | ≥1.5 | interlaminar shear strength(Mpa) | ≥ 50 | ≥ 40 | Pulling Bonding Strength along with Concrete(Mpa) | ≥ 2.5 | ≥ 2.5 | Fiber volume content(%) | ≥ 65 | ≥ 55 |
Product model | CXS-1.4×50 | CXS-1.4×100 | CXS-1.2×50 | CXS-1.2×100 | Width(mm) | 50 | 100 | 50 | 100 | Thickness(mm) | 1.4 | 1.4 | 1.2 | 1.2 | Length(m)/roll | 100 | 100 | 100 | 100 |
|